Also - you'll need to address your syntax. I suggest this because the uri error your getting would suggest the path is not found. I would first check that you correctly have the 'nexus-startup.cfg' in your TFTP root folder, so that it's not a path issue. Please let me know what am I doing wrong and how can I rectify this error. Intel(R) Xeon(R) CPU with 8251588 kB of memory.
The device is a Cisco Nexus 7000 series device with following details: SoftwareĬisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X") I tried to copy the file using all the four remote server protocol and got the same error with different URI type. Sysmgr_copy_nvram_dest_action: src uri_type = 2 is not supported yet So, I tried running command copy tftp:///nexus-startup.cfg startup-config and got the following output with error: Nexus7K01# copy t startup-configĮnter vrf (If no input, current vrf 'default' is considered): management Working With Configuration Files: Downloading the Startup Configuration From a Remote Server I tried the instructions given at this page: See įor more information on how to use XMODEM to do this.I am trying to replace the startup configuration on Cisco Nexus device using a file on remote server. This is what you need to do if for some reason the switch looses its IOS. bin file from the tar archive and then use the XMODEM protocol and a terminal program such as hyperterm upload the image back onto the switch using the console cable.
This assumes that the switch has a working IOS on it already.Ģ) Extract IOS. To restore the IOS archive file to the switch you can:ġ) get do the basic network configuration, telnet into the switch and use the following command:
To restore the configuration you can either:ġ) use DHCP and TFTP as described in AutoInstall Using DHCP for LAN Interfaces ( ) orĢ)you can get the basic networking up on the switch using the console and then telnet into the switch and use the following commands: This will create a tar archive called switch1-ios.tar of the IOS and web device manager files from your switch on your tftp server. To backup the IOS and the switches web-based device manager (the web interface files) you need to do the following: To backup the configuration of a Catalyst 2950 switch you telnet into the switch and run the following command:
0 kommentar(er)
